4-канальный усилитель мощности Ascendo DSP 4-20K2
Цена: 2362517 руб.
Описание
Технические характеристики
|
DSP Series |
DSP4-10K2 MKII |
DSP4-20K2 |
|
DSP Channels |
4 |
4 |
|
Channels |
4 |
4 |
|
Total Output Power |
10.000W |
20.000W |
|
Output Power 230V @2Ω |
4 x 2.500W |
4 x 5000W |
|
Output Power 230V @4Ω |
4 x 2.500W |
4 x 5.000 W |
|
Output Power 230V @8Ω |
4 x 1.250W |
4 x 2.500W |
|
Bridged: Output Power 230V @4Ω |
2 x 5.000W |
2 x 10.000W |
|
Bridged: Output Power 230V @8Ω |
2 x 5.000W |
2 x 10.000W |
|
Max output voltage |
150 Vpeak |
235 Vpeak |
|
Max output current |
50 Apeak |
71 Apeak |
|
Required AC Mains Operating Voltage (50Hz-60Hz) 1/8 Rated Power (@230V AC, 4Ω) 1/8 Rated Power (@120V AC, 4Ω) Idle |
90V-265V AC 7,3 A / 1634 W 14 A / 1634 W 0,7 A / 85 W |
90V-265V AC 14 A / 3268 W 26,8 A / 3268 W 1 A / 112 W |
|
W x H X D (mm) |
483 x 89 x 335 |
483 x 89 x 335 |
|
W x H X D (inch) |
19 x 3,5 x 14 |
19 x 3,5 x 14 |
|
Weight (kg) |
7 |
9 |
|
Weight (lbs) |
15,4 |
19,8 |
|
Converter |
High Performance 96kHz/24 bits AD/DA converters, 64 bit double-precision 96kHz DSP process |
|
|
Process latency time |
0,85 ms minimum |
|
|
Input IIR EQ section (4x) |
Gain, Mute, Phase inversion, Delay (up to 333ms, 114m), 16 EQ filters (Parametric, Shelving, LP, HP, BP, SB, AP) |
|
|
Output IIR EQ section (4x) |
Crossover Filters: (up to 48dB/oct, Butterw./LR/Bessel), 12 filters per channel (Param., Shel, LP, HP, BP, SB, AP) |
|
|
Output FIR EQ section (4x) |
Crossover Filters: (up to 48dB/oct, Butterw./LR/Bessel), 20 filters per channel (Param., Shel, LP, HP, BP, SB, AP) or Custrom. Up to 1000 taps |
|
|
Output Delay |
Output Delay: 0 to 31 meters (90ms) per channel |
|
|
Output Limiter |
RMS and Peak limiter per channel |
|
|
Network Switch |
2ports Ethernet switch for daisy chain connection |
|
|
Controlling |
Software via Ethernet or USB |
|
|
Speaker Output |
Neutrik |
|
|
Input |
XLR |
|
|
Input Optional |
Dante AES67 |
|
|
Voltage Gain |
26 dB to 44 dB (1 dB Step) |
|
|
Signal-to-Noise Ratio |
111 dBA |
115 dBA |
|
Total Harmonic Distortion |
<0,05% |
|
|
Crosstalk 20Hz – 1kHz, typical |
>70dB |
|
|
Protections |
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™, PMS™ |
|
|
Technical modifications subject to change without further notice |
||
